Campbell Scientific AP200 CO2/H2O Atmospheric Profile System - Manual (Page 108)

Appendix H. Using Swagelok ® Fittings
Plugs
Swagelok ® plugs are used to plug a fitting when its tube is disconnected. It is
strongly recommended to plug all fittings to keep them clean. Spare plugs may
be needed if they become lost or damaged.
FIGURE H-3. Swagelok ® plug
TABLE H-4. Dimensions and Part Numbers for
Swagelok ® Plugs
Tubing OD (in) Swagelok ® pn CSI pn
1/8 B-200-P 26803
1/4 B-400-P 15891
3/8 B-600-P 13712
1/2 B-810-P 17381
5/8 B-1010-P N/A
Caps
Swagelok ® caps are used to cap the end of tubes when they are disconnected
from the fitting. It is strongly recommended to cap all disconnected tubes to
keep them clean. Spare caps may be needed if they become lost or damaged.
FIGURE H-4. Swagelok ® cap
H-4