Table 7-9. service internal parameters -45 – ADC SG-1 User Manual
Page 125
Chapter 7: Second Level Commands
7-45
Using the service internal command
The system default internal service is Framed-PPP. When configured to the default value, write terminal does not
present the configuration line.
Usage
service internal <Framed-PPP | VPDN <tunnel id> <l2tp tunnel password> <Primary IP
address> [Secondary IP address]>
Parameter(s)
Table 7-9. service internal parameters
Example(s)
Host(config)# service internal
Parameter
Description
Legal values / range
<Tunnel id>
The tunnel ID.
Alpha numeric string (up to 64
characters)
<L2tp tunnel password>
The password used to authenticate to a
remote server.
Alpha numeric string (up to 64
characters)
<Primary IP address>
The internal service line definition, as
defined in VSA.
IP address
<Secondary IP address>
The internal service line definition, as
defined in VSA.
IP address
Host(config)# service internal vpdn oipoy bbbdfe 9.22.4.12 10.9.8.33