Table 7-17.vrrp command parameters -68 – ADC SG-1 User Manual
Page 148
Chapter 7: Second Level Commands
7-68
Table 7-17. vrrp command parameters
The following examples use two SCCs (Service Creation Cards):
Example 1 (SCC1 configuration):
Example 2 (SCC2 configuration):
The following two examples show the configuration with preemption capabilities:
Parameter
Description
Legal values/range
<Ethernet | VLAN>
The interface should be Ethernet or
VLAN.
Ethernet, VLAN
<slot number>
Slot number.
0, 1
<port number>
Physical port number.
1 to 3
<VLAN ID>
VLAN ID number.
<number>
Virtual Router Group Number (VRID). 1 to 15
IP address
IP address of the virtual router.
Legal IP address
<priority value>
VRRP router priority value.
1 to 254
<on | off>
VRRP preemptive mode.
On or off (default value is off)
Host(config)# vrrp interface Ethernet 0\1 1 ip 192.168.1.3 priority 200
Host(config)# vrrp interface Ethernet 0\1 1 ip 192.168.1.3 priority 100