ADC SG-1 - Manual (Page 162)

Appendix A: SG-1 Vendor-Specific Attributes June 30, 2006
A-4 SG1-UM-8500-03
33 nip-pipe-next-hop route 72 V7.0 Defines the next-hop router to be
used for the traffic destined to a
native IP user.
34 advertise-
protocol route 73 V7.0 Defines the routing protocol to be
use to advertise the session IP
address.
35 forward-addr route 74 V90 Defines the forwarding address.
36 acl-tcp-nat-
redirect route 75 V90 Defines a destination IP address to
which the system should TCP
redirect all session packets.
37 tunnel-id vpdn 80 V5.0 Defines the tunnel ID, used for LAC
purpose.
38 l2tp-tunnel-
password vpdn 81 V5.0 Contains a password to be used to
authenticate to a remote server.
39 ip-address vpdn 82 V5.0 Contains the address of the server
end of the tunnel.
40 tunnel-
assignment-id vpdn 83 V5.0 Indicate to the tunnel initiator the
particular tunnel to which a session
is to be assigned.
41 tunnel-client-ip-
address vpdn 84 V5.0 Contains the address of the initiator
end of the tunnel (LAC IP address).
42 nativeip vpdn 85 V7.0 Defines a session as a native IP
pipe, means the session acts as
tunnel for native IP traffic.
43 ip-tunnel vpdn 86 V7.0 Defines the tunneling protocol and
the destination tunneling server IP
address, which all the session data
should be tunneled to.
44 up-mean-rate qos 90 V5.0 Specifies the average number of
bits per second allowed by the user
in the upstream direction.
45 down-mean-rate qos 91 V5.0 Specifies the average number of
bits per second allowed by the user
in the downstream direction.
46 acl-up-mean-rate qos 92 V7.0 Specifies the average number of
bits per second allowed to the user
in the upstream direction per a
specified access list.