ADC SG-1 - Manual (Page 213)

June 30, 2006 Appendix B: Redirection Server
SG1-UM-8500-03 B-19
N AME S ERVER
Using ip primary-name-server command
• The ip primary-name-server command defines the primary DNS server IP address the RDS should use for the
Http proxy functionality.
• The command is located in the “configure terminal” menu.
Usage
ip primary-name-server <IP address>
Parameter
<IP address>
It is the DNS IP address.
Example:
Using no ip primary-name-server command
• The no ip primary-name-server command deletes the DNS server IP address definition (set the OBI to
0.0.0.0).
• The command is located in the “configure terminal” menu.
Usage
no ip primary-name-server
Example:
RDSHost(config)> ip dns server 192.168.1.4 <cr>
RDSHost> write terminal <cr>
...
ip dns server 192.168.1.4
...
RDSHost(config)> no ip primary-name-server <cr>
RDSHost> write terminal <cr>
...