Displaying ethernet port configurations, Displaying ethernet port statistics – ADC SG-1 User Manual
Page 45
Advertising
Chapter 6: First-Level Commands
6-9
Displaying Ethernet port configurations
Displaying Ethernet Port Statistics
Use the show ethernet command to display the Ethernet port parameters for the Rear I/O Ethernet port.
Usage
show ethernet <slot number> <port number>
Parameter(s)
<slot number>
The slot number refers to 0 (for the Rear I/O) card and 1 for a Gigabit Ethernet port on the SCC card itself.
<port number>
The port number refers to a value of 1 to 3 for the card in question.
Host> show terminal
Host> show ethernet 0 \ 1
Note:
When keying in the command, the backward slash ‘\’ is optional. The command will work with just a
space between the slot number and port number.
Advertising