ADC SG-1 - Manual (Page 191)

June 30, 2006 Appendix A: SG-1 Vendor-Specific Attributes
SG1-UM-8500-03 A-33
QOS GROUP
qos:up-mean-rate
The qos:up-mean-rate sub-attribute specifies the average number of bits per second allowed by the user in the
upstream direction. It is sent in an Access-Accept message and it overwrites the current upstream rate allocated to
the user. This attribute may be activated during a session lifetime.
General:
Format:
gcon-avpair = "qos:up-mean-rate=<up mean rate in Kbits>",
Example:
gcon-avpair = "qos:up-mean-rate=128",
qos:down-mean-rate
The qos:up-mean-rate sub-attribute specifies the average number of bits per second allowed by the user in the
downstream direction. It is sent in an Access-Accept message and it overwrites the current downstream rate
allocated to the user. This attribute may be activated during a session lifetime.
General:
Format:
gcon-avpair = "qos:down-mean-rate=<down mean rate in Kbits>",
Example:
gcon-avpair = "qos:down-mean-rate=256",
qos:acl-up-mean-rate sub attribute
The qos:acl-up-mean-rate sub-attribute specifies the average number of bits per second allowed to the user in the
upstream direction per a specified access list. It is sent in Access-Accept message and it overwrites the current
access list upstream rate of the user. This attribute may be operated during the session lifetime (EDS).
Operation Mode: Access-Accept message
Service-Accept message
Vendor-type: 90
Vendor-length = 2 + name length + (1-128)
Operation Mode: Access-Accept message
Service-Accept message
Vendor-type: 91
Vendor-length = 2 + name length + (1-64)