Showing a list of available parameters, Using the ? command, Showing a list of available parameters -2 – ADC SG-1 User Manual
Page 38
Advertising
Chapter 6: First-Level Commands
6-2
S
HOWING
A
L
IST
OF
A
VAILABLE
P
ARAMETERS
Using the GREP command
The GREP command may be operated on any of the system commands.
Usage
system-command | grep "string"
Example(s)
Using the ? command
The list of available parameters can be viewed by typing ? at the first-level prompt.
Host> show users | grep "moshe" <cr>
1 ANet PPP
moshe 192.168.2.12 00:04:23 9568432
Host>
Host> write terminal |grep "interface" <cr>
interface loopback 1 10.1.208.1 255.255.255.0
interface ethernet 0\2 1.1.1.1 255.255.255.0 auto
Host>
Host> ?
Advertising