Service name commands, Using service-name command, Using event-level command – ADC SG-1 User Manual
Page 198
Advertising
Appendix B: Redirection Server
B-4
S
ERVICE
N
AME
C
OMMANDS
Using service-name command
• The service-name command defines the service to be operated for all sessions.
• The command located at the “configure terminal” menu.
Usage
service-name <service name>
Example:
Using no service-name command
• The no service-name command disables the operating of a service for all the sessions.
• The command located at the “configure terminal” menu.
Usage
no service-name
Example:
Using event-level command
• This command defines the event level to log and the media to use for logging.
• The command is located at the “configure terminal” menu.
RDSHost> configure terminal <cr>
RDSHost(config)# service-name srv17
RDSHost> configure terminal <cr>
RDSHost(config)# no service-name
Advertising