Table 7-2. ethernet operating mode -5, Table 7-2 – ADC SG-1 User Manual
Page 85
Advertising
Chapter 7: Second Level Commands
7-5
Table 7-2. Ethernet Operating Mode
Usage
no interface Ethernet <slot number>\<port number>
Parameter(s)
<slot number>
This is the interface slot number you want to configure.
<port number>
This is the physical port number you want to configure.
Example(s)
Value
Explanation
10 H
10M half-duplex
10 F
10M full-duplex
100 H
100M half-duplex
100 F
100M full-duplex
1000 H
1000M half-duplex
1000 F
1000M full-duplex
auto
auto sensing
Host(config)# no interface Ethernet
Host(config)# no interface Ethernet 0\1
Advertising