ADC SG-1 - Manual (Page 75)

June 30, 2006 Chapter 6: First-Level Commands
SG1-UM-8500-03 6-39
This command displays the arp table information.
Usage
Show arp [<index><NextAddress>]
Parameter(s)
<index>
The interface on which this entry’s equivalence is effective. Numbers are 1 to 65,000.
<NextAddress>
This is the IP address corresponding to the media-dependent “physical address. It should be a legal IP address.
Example
show arp command
Host(debug)# show arp
Host(debug)# show arp
IfIndex PhyAddress NetAddress MediaType
1 000000000000 127.0.0.1 static
4004 00D0B715A7E3 172.16.1.1 non-volatile
4004 0001AF0A1CB3 172.16.1.13 static
4004 00D0B7174CF7 172.16.1.15 dynamic
4005 0001AF0A1CB2 172.16.13.193 static