ADC SG-1 - Manual (Page 217)

June 30, 2006 Appendix B: Redirection Server
SG1-UM-8500-03 B-23
Example:
Using no remote-ip-in-ip command
• The no remote-ip-in-ip command deletes the remote endpoint definition.
• The command is located in the “configure terminal” menu.
Usage
no remote-ip-in-ip <IP address>
Parameter
<IP address>
It is the remote ip-in-ip endpoint IP address.
Example:
RDSHost(config)> remote-ip-in-ip 192.168.1.4 <cr>
RDSHost(config)> remote-ip-in-ip 192.168.1.5 <cr>
RDSHost(config)> remote-ip-in-ip 192.168.1.6 <cr>
RDSHost> write terminal <cr>
...
remote-ip-in-ip 192.168.1.4
remote-ip-in-ip 192.168.1.4
remote-ip-in-ip 192.168.1.4
...
RDSHost(config)> no remote-ip-in-ip 192.168.1.4 <cr>
RDSHost(config)> no remote-ip-in-ip 192.168.1.5 <cr>
RDSHost(config)> no remote-ip-in-ip 192.168.1.6 <cr>
RDSHost> write terminal <cr>
...