ADC SG-1 - Manual (Page 177)

June 30, 2006 Appendix A: SG-1 Vendor-Specific Attributes
SG1-UM-8500-03 A-19
service:next-service-name
This vendor specific sub-attribute defines the name of the next service to use when a service "session timeout"
expires. The system then checks if the authentication base is of service type and a next service is configured for the
session. In that case it activates the next service. It would do so in the same way it would activate a new service
received directly from a service selection center. If no next service name is configured the system activates a static
service called "GServiceTimeout". If no service timeout is configured, the system immediately activates the received
next service. The attribute may be included only once in access-accept message. When appearing more than once
the system will consider the last attribute appearance.
General:
Format:
adc-avpair = "service:next-service-name=<service name>",
Example:
adc-avpair = "service:next-service-name=SRV12",
service:auto-service-name
The service:auto-service-name sub-attribute contains the service name to be automatically activated when the user
is redirected by the RDS. The system keeps the auto-service-name information for use in EDS query response. The
system deletes the auto-service-name information after sending the query response, since it should be used only
once. The attribute may be included only once in access-accept message. When appearing more than once the
system will consider the last attribute appearance.
General:
Format:
adc-avpair = "service:auto-service-name=<service name>",
Example:
adc-avpair = "service:auto-service-name=SRV12",
Note:
1. After activating the next-service the system has no configured next service. This is true unless the
activated next-service includes the next-service-name sub-attribute as well.
2. The service timeout sub-attribute is defined per link.
Operation Mode: Access-Accept message
Service-Accept message
Vendor-type: 51
Vendor-length = 2 + name length + (1 - 128)
Operation Mode: Access-Accept message
Service-Accept message
Vendor-type: 52
Vendor-length = 2 + name length + (1-128)