ADC SG-1 - Manual (Page 44)

Chapter 6: First-Level Commands June 30, 2006
6-8 SG1-UM-8500-03
ip local-pool pool1 162.10.1.1 162.10.1.254 internal
ip domain-name POPmaestro
ip primary-name-server 62.90.133.233
ip secondary-name-server 0.0.0.0
ip default-gateway 172.16.1.1
ip tcp adjust-mss on
ip dhcp relay server Ethernet 0\2 1 172.16.1.15
debug
watchdog-TimeValue 60
time-server-ip 0.0.0.0
error-level default 3 output-device console
event-level default 5 output-device console
trace default off
sysLog-server-ip 192.168.1.1
Host>
Note: Using show configuration for the first time on a blank system may return a File does not exist
message until the configuration is written to NVRAM using the write memory command.