Using syslog-server-ip command – ADC SG-1 User Manual
Page 201
Appendix B: Redirection Server
B-7
Example 1: Successful software download
Example 2: Unsuccessful software download
Using sysLog-server-ip command
• The sysLog-server-ip command defines the IP address of the sysLog server.
• It is located at the “configure terminal” menu.
• SysLog server IP initial value is 0.0.0.0.
Usage
sysLog-server-ip <sysLog server IP>
Parameter
<sysLog server IP>
This is the IP address of the sysLog server.
Example:
RDSHost> copy-TFTP flash def-redirection-page 192.168.1.4 RDS.pack <cr>
Download in progress ...
File loaded successfully
RDSHost>
RDSHost> copy-TFTP flash def-redirection-page 192.168.1.4 test.doc <cr>
Download in progress ...
File loaded unsuccessfully due to: Download pack file is corrupted
RDSHost>
RDSHost> sysLog-server-ip 192.168.1.8 <cr>
RDSHost>