ADC SG-1 - Manual (Page 153)

June 30, 2006 Chapter 7: Second Level Commands
SG1-UM-8500-03 7-73
Example
(config-debug)# error-level default [ set-all <number>]
Parameters
set-all
Will set all modules back to default
<number>
value of default maximum error level , numbers are ….
Examples
Usage
(config-debug)# error-level < default | Module | Group >
Parameters
<default>
System's Default maximum error level
<Module>
System's error log by Module
<Group>
System's error log by Module
(config-debug)# error-level default
(config-debug)# error-level default 4 output-device console
(config-debug)#
(config-debug)# error-level default 3 output-device console
(config-debug)#
(config-debug)# error-level