ADC SG-1 - Manual (Page 52)

Chapter 6: First-Level Commands June 30, 2006
6-16 SG1-UM-8500-03
Displaying System Parameters
Usage
show system
show system <load>
Parameter(s)
<load>
Calculates the throughput through each interface in Mbps.
Example(s)
Host> show system
Host> show system
Up-time: 1 Hours, 56 Minutes, 58 Seconds
Total number of network incoming calls: 702
Total number of network connected calls: 702
Current number of Network connected lines: 1
ANet (Analog source) lines: 1, INet (ISDN source) lines: 0
Eth (Ethernet source) lines: 0
ATM (ATM source) lines: 0
Ethernet Over ATM (EATM source) lines: 0
Current number of PPP (PPP source) lines: 0
Current number of connected Framed users: 1
PPP users: 1, MLP users: 0
Current number of connected native IP users: 0
Host>