Using write memory command, Using poweroff command, Snmp commands – ADC SG-1 User Manual
Page 209: Using access-list snmp-permit command, Snmp c
Advertising
Appendix B: Redirection Server
B-15
Using write memory command
• The write memory command writes the running RDS configuration to the NV memory.
• It is located at the “main” menu.
Usage
write memory
Example:
U
SING
P
OWEROFF
C
OMMAND
• The poweroff command brings the system down in a secure way.
• It is located at the “main” menu.
Usage
poweroff
Example:
SNMP C
OMMANDS
Using access-list SNMP-permit command
• The access-list SNMP-permit command enables SNMP access command.
• It is located at the “configure terminal” menu.
Usage
access-list SNMP-permit <IP address> <source mask>
RDSHost>
RDSHost> write memory <cr>
RDSHost>
RDSHost>
RDSHost> poweroff
RDSHost> system is shutting down...
Advertising