Using show configuration command, Using show system command – ADC SG-1 User Manual
Page 203
Appendix B: Redirection Server
B-9
Example 3:
Using show configuration command
• The show configuration command displays RDS configuration.
• It is located at the “main” menu.
Usage
show configuration
Example:
Using show system command
• The show system command displays the system information of the RDS.
• It is located at the “main” menu.
• The command presents the following information:
a.System time
b.Http hits statistics
c. RDS current CPU usage
Usage
show system
RDSHost> show version pack <cr>
Pack Image Name: V1.0_RDS_pack
Version: V1.0_RDS October 29 2001 19:53:37
Size: 1537790 byte
Pack Components:
Kernel Version: V2.4 October 29 2001 15:00:10
EDS.php Version: V1.0 October 29 2001 19:49:43
RDSHost>
RDSHost>
RDSHost> show config <cr>
# version: V1.0_RDS Apr 25 2002 15:44:56
# Last saved: 25 May 2002 10:10:30
event-level 1 output-device sys-logger
default-redirection-site http://192.168.1.5/RDS.html
interface Ethernet 1 192.168.1.4 255.255.255.03
ip default-gateway 192.168.1.1
RDSHost>