ADC SG-1 - Manual (Page 34)

Chapter 4: Accessing the Command Line Interface June 30, 2006
4-4 SG1-UM-8500-03
D ISPLAYING THE IP A DDRESS
From the Host> prompt, enter the show configuration command to verify your configuration.
Example(s)
When the show configuration command is entered, A screen similar to the one above displays the SG-1 SCC
card’s Ethernet port IP address, subnet mask, and default gateway (if applicable).
Host> show configuration
Host> show configuration
…
interface ethernet 0\1 192.168.0.1 255.255.255.0 mode auto
ip default-gateway 192.168.0.253
…