ElmoMC Multi-Axis Motion Controller-Maestro - Manual (Page 143)

Maestro Software Manual The CANopen Configurator
MAN-MASSW (Ver. Q)
9-9
9.7 CANopen Configurator Options
The CANopen Configurator adjustment parameters make it possible for the user to
change the features via the Options dialog box (Figure
9-15). This dialog box is
accessed from the Edit > Options menu , or via the Ctrl+P keystroke combination.
Figure 9-15: CANopen Configurator Options
9.7.1 Changeable Properties
The user can modify the properties in the CANopen Configurator Options dialog box,
as described below:
• Connect to Maestro device defines how the program establishes
communication with the target Maestro device.
Figure 9-16: Contextual Menu to Target the Maestro Device
ƒ Enable auto connect immediately connects to the device defined as a
Target Maestro device at the start of the program.
ƒ Target Maestro device contains the IP address of the specific device to
connect to automatically. The property is available only if the auto
connect property is set to YES.
1. After the auto connect property value is changed, click on
the Target Maestro device property value field to change
the IP address.
2. Right click above the property value field and select Locate
to open the Maestro Locator window
3. Select the correct device.