ElmoMC Multi-Axis Motion Controller-Maestro - Manual (Page 23)

4.1 General Functions
Note: Entering a question mark from the terminal before any function name opens the
help text for the function. (Terminal only)
Function
backup
- restart the Maestro with the previous configuration
Call Format backup
Limitations Terminal only
Function
baudrate
- get the CAN bus baud rate
Call Format baudrate(BusID)
Parameters BusId - CAN bus ID number
Limitations Terminal only
Example baudrate(0)
Function
businfo
- get CAN Bus information
Call Format businfo <bus_number> - CAN bus number (default value = 0)
Limitations Terminal only
Example businfo 1
Function
bye
, quit or exit - close the current session
Call Format bye
Limitations Terminal only
Function
command
- gets help text with the general structure for the motion
object commands.
Call Format ?command
Limitations Terminal only
Function
date
- get (or set) the current date
Call Format date - To change the date, enter a date according to the format
DD.MM.YYYY.
Limitations Terminal only
Example date 16.11.2005.
Maestro Software Manual
MAN-MASSW (Ver. Q)
4-4