ElmoMC Multi-Axis Motion Controller-Maestro - Manual (Page 18)

Maestro Software Manual
MAN-MASSW (Ver. Q)
3-1
Chapter 3: Host Communications
This chapter explains how to set up the Workspace to work with a specific Maestro as a
host.
3.1 Setting Up the Host through Elmo's Studio
A Select Maestro pick list pops up when starting a new worksheet for the first time. The
window contains a list of Maestros currently attached to the network. The IP Address of the
Maestro and its name are listed. Select the Maestro you plan to work with and click OK.
Figure 3-1 The Maestro Selection Window
3.2 Verifying or Changing the Host
To verify that you have set up the correct Maestro as the host, or to change to another
Maestro, move the cursor into the File Viewer and click on the right mouse button. When
the menu pops up select Workspace Settings. This will cause the Workspace Settings
window to open. If the IP Address is wrong, click the Find button to open the Select
Maestro window.
Figure 3-2 Right Mouse Button
Selection Options
Figure 3-3 The Workspace Settings Window