Micro850 48-point controllers – Rockwell Automation 2080-LC50 Micro830 and Micro850 Programmable Controllers User Manual User Manual

Page 185

Advertising
background image

Rockwell Automation Publication 2080-UM002F-EN-E - December 2013

169

Specifications Appendix A

Micro850 48-Point Controllers

ESD immunity

IEC 61000-4-2:
6 kV contact discharges
8 kV air discharges

Radiated RF immunity

IEC 61000-4-3:
10V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
10V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz

EFT/B immunity

IEC 61000-4-4:
±2 kV @ 5 kHz on power ports
±2 kV @ 5 kHz on signal ports
±1 kV @ 5 kHz on communication ports

Surge transient immunity

IEC 61000-4-5:
±1 kV line-line(DM) and ±2 kV line-earth(CM) on power ports
±1 kV line-line(DM) and ±2 kV line-earth(CM) on signal ports
±1 kV line-earth(CM) on communication ports

Conducted RF immunity

IEC 61000-4-6:
10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz

Isolated AC Inputs (2080-LC50-24QWB, 2080-LC50-24QVB, 2080-LC50-24QBB)
(Inputs 0…7)

Attribute

Value

On-state voltage, nom

12/24V AC @ 50/60 Hz

Off-state voltage, min

4V AC @ 50/60Hz

Operating frequency, nom

50/60 Hz

Environmental Specifications

Attribute

Value

General Specifications – 2080-LC50-48AWB, 2080-LC50-48QWB, 2080-LC50-48QVB, 2080-LC50-48QBB

Attribute

2080-LC50-48AWB

2080-LC50-48QWB

2080-LC50-48QVB

2080-LC50-48QBB

Number of I/O

48 (28 inputs, 20 outputs)

Dimensions
HxWxD

90 x 238 x 80 mm
(3.54 x 9.37 x 3.15 in.)

Shipping weight, approx.

0.725 kg (1.60 lb)

Wire size

0.2…2.5 mm

2

(24…12 AWG) solid copper wire or

0.2…2.5 mm

2

(24…12 AWG) stranded copper wire

rated @ 90 °C (194 °F ) insulation max

Wiring category

(1)

2 – on signal ports
2 – on power ports
2 – on communication ports

Wire type

Use Copper Conductors only

Terminal screw torque

0.4…0.5 Nm (3.5…4.4 lb-in.)
(using a 0.6 x 3.5 mm flat-blade screwdriver)

Input circuit type

120V AC

12/24V sink/source (standard)
24V sink/source (high-speed)

Output circuit type

Relay

24V DC sink (standard and
high-speed)

24V DC source (standard
and high-speed)

Advertising
This manual is related to the following products: