Rockwell Automation 2080-LC50 Micro830 and Micro850 Programmable Controllers User Manual - Manual (Page 3)

Rockwell Automation Publication 2080-UM002F-EN-E - December 2013 iii
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• who should use this manual
• the purpose of this manual
• related documentation
• supporting information for Micro800™
Who Should Use this
Manual Use this manual if you are responsible for designing, installing, programming, or
troubleshooting control systems that use Micro800 controllers.
You should have a basic understanding of electrical circuitry and familiarity with
relay logic. If you do not, obtain the proper training before using this product.
Purpose of this Manual This manual is a reference guide for Micro800 controllers, plug-in modules and
accessories. It describes the procedures you use to install, wire, and troubleshoot
your controller. This manual:
• explains how to install and wire your controllers
• gives you an overview of the Micro800 controller system
Refer to the Online Help provided with Connected Components Workbench™
software for more information on programming your Micro800 controller.
Additional Resources These documents contain additional information concerning related Rockwell
Automation products.
Resource Description
Micro800 Analog and Discrete Expansion I/O
Modules
2080-UM003
Information on features, configuration, wiring,
installation, and specifications for the Micro800
expansion I/O modules.
Micro800 Plug-in Modules 2080-UM004 Information on features, configuration,
installation, wiring, and specifications for the
Micro800 plug-in modules.
Micro800 Programmable Controllers: Getting
Started with CIP Client Messaging
2080-QS002
Provides quickstart instructions for using CIP
GENERIC and CIP Symbolic Messaging.
Micro800 Programmable Controller External AC
Power Supply Installation Instructions
2080-IN001
Information on mounting and wiring the optional
external power supply.
Micro830 Programmable Controllers Installation
Instructions
2080-IN002
Information on mounting and wiring the
Micro830 10-point Controllers.
Micro830 Programmable Controllers Installation
Instructions
2080-IN003
Information on mounting and wiring the
Micro830 16-point Controllers.
Micro830 Programmable Controllers Installation
Instructions
2080-IN004
Information on mounting and wiring the
Micro830 24-point Controllers.