Schematic – using ansi/csa symbols), Schematic (using ansi/csa symbols) – Rockwell Automation 2080-LC50 Micro830 and Micro850 Programmable Controllers User Manual User Manual
Page 34
Advertising
20
Rockwell Automation Publication 2080-UM002F-EN-E - December 2013
Chapter 2 About Your Controller
Schematic – Using ANSI/CSA Symbols)
Emergency-stop
push button
230V AC
Operation of either of these contacts will
remove power from the external I/O
circuits, stopping machine motion.
Fuse
MCR
Fuse
MCR
MCR
MCR
Stop
Start
Line Terminals: Connect to terminals of power
supply
Line Terminals: Connect to 24V DC terminals of
power supply.
230V AC
output
circuits
Disconnect
Isolation
Transformer
115V AC or
230V AC
I/O circuits
L1
L2
Master Control Relay (MCR)
Cat. No. 700-PK400A1
Suppressor
Cat. No. 700-N24
(Lo)
(Hi)
DC Power Supply. Use
NEC Class 2 for UL
Listing
.
X1
X2
115V AC or
230V AC
_
+
MCR
24 V DC
I/O
circuits
Suppr.
Overtravel
limit switch
44565
Advertising
This manual is related to the following products: