Metrohm 920 Absorber Module User Manual
Page 102
10.1 Scope of delivery
■■■■■■■■■■■■■■■■■■■■■■
94
■■■■■■■■
920 Absorber Module
Qty.
Order no.
Description
1
6.1014.200
Metrosep I Trap 1 - 100/4.0
The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic,
i.e. cationic and anionic, contaminants from aqueous solutions. Its
use is especially recommended for the purification of the transfer
water in combination with "MISP" or "Metrohm Inline Sample Prepa-
ration." Using the Metrosep I Trap 1 - 100/4.0 column can signifi-
cantly reduce the influence of the transfer water on the system
blank.
Housing material:
PEEK
Particle size (µm):
300…840
Max. pressure:
25 MPa
pH range:
0…14
Column type:
1
Column dimensions (mm):
100 x 4.0
2
6.1546.030
Extractor rod
For PTFE piston of dosing unit
3
6.1803.030
PTFE capillary 0.5 mm i.d. / 3 m
Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Pro-
cessor, IC Liquid Handling Dialysis Unit
Material:
PTFE
Outer diameter (inches):
1/16
Inner diameter (mm):
0.5
Length (m):
3