Metrohm 920 Absorber Module - Manual (Page 86)

4.10 Connecting the 920 Absorber Module to the remaining components
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
78 ￭￭￭￭￭￭￭￭
920 Absorber Module
4.10.3 Connecting the 930 Compact IC Flex
A capillary is routed out on the left side of the 920 Absorber Module.
This capillary is connected to the injection valve of the 930 Compact IC
Flex.
Accessories For this step you need:
￭ Capillary cutter (6.2621.080)
Connecting the 930 Compact IC Flex
1 ￭ Shorten the end of the capillary using the capillary cutter so that it
can be connected to the injection valve of the 930 Compact IC
Flex easily.
￭ Connect the end of the capillary to port 1 of the injection valve
(see manual for 930 Compact IC Flex).
NOTE
The process for connecting the respective instruments to a computer or
a power supply is described in the respective manuals:
￭ 930 Compact IC Flex manual.
￭ 920 Absorber Module manual.
￭ Combustion Module operating instructions (on the accompanying
CD).
￭ MMS 5000 operating instructions (on the accompanying CD).
￭ LPG/GSS Module manual (on the accompanying CD).