Metrohm 920 Absorber Module User Manual
Page 24
3.2 Rear
■■■■■■■■■■■■■■■■■■■■■■
16
■■■■■■■■
920 Absorber Module
5
Extension Module connection socket
Connection socket for an 872 Extension
Module or an 891 Professional Analog Out.
6
Detector connection sockets
Two connection sockets for connecting up
to two detectors, labeled as Detector 1
and Detector 2.
7
Leak sensor connection socket
For connecting the leak sensor connection
cable.
8
Capillary openings
Five openings on the back panel for guiding
capillaries and and tubings out of the instru-
ment.
9
Type plate
With article number and barcode.
10 Leak sensor cable
Extractable. Coiled up in the base tray. Must
be connected to the leak sensor connection
socket.
11 Drain nozzle
Enables liquids that have leaked from the
bottle holder and inside the instrument to
drain.
12 Heat sink
To remove heat from inside the instrument.
Caution: May become hot.
13 Power socket
For connecting the power supply cable.
14 On/off switch
For switching the instrument on and off.