Metrohm 920 Absorber Module User Manual
Page 76
Advertising
4.7 Absorber tube
■■■■■■■■■■■■■■■■■■■■■■
68
■■■■■■■■
920 Absorber Module
On the … of
the absorber
tube
Install this accessory
top
Stopper
bottom
Absorber tube holder (6.2766.000) consisting of the holder and a
sealing ring
Assembling the absorber tube
Assemble the absorber tube according to the following figure:
6.2766.000
6.2421.000
1 Assembling the absorber tube holder
■
Place the sealing ring in the holder.
■
Screw the holder in place on the bottom end of the absorber
tube.
■
Check whether the stopper is in place at the upper end of the
absorber tube.
The following capillaries have to be fastened to the assembled absorber
tube.
Advertising