Figure 7, Capillaries and tubings in use – overview – Metrohm 920 Absorber Module User Manual
Page 26
4.2 Overview
■■■■■■■■■■■■■■■■■■■■■■
18
■■■■■■■■
920 Absorber Module
Capillaries and tub-
ings
Figure 7
Capillaries and tubings in use – Overview
1
PTFE capillary, 0.75 mm ID / 3 m
(6.1803.160)
Connection between the 6-port valve and
the waste container.
2
PEEK capillary, 0.5 mm ID / 15 cm
(6.1831.040)
Connection between the 6-port valve and
the 10-port valve.
3
PTFE capillary, 0.75 mm ID / 3 m
(6.1803.160)
Approx. 80 cm. Connection between the
10-port valve and the bottle with the stand-
ard solution.
4
PTFE capillary, 0.75 mm ID / 3 m
(6.1803.160)
Approx. 80 cm. Connection between the
10-port valve and the bottle with the check
standard.
5
PTFE capillary, 0.75 mm ID / 3 m
(6.1803.160)
Approx. 60 cm. Connection between the
10-port valve and the absorber tube.
6
PTFE capillary, 0.75 mm ID / 3 m
(6.1803.160)
Approx. 5 cm. For aspirating air segments.
7
PTFE capillary, 0.75 mm ID / 3 m
(6.1803.160)
Connection between the 10-port valve and
the waste container.
8
PTFE capillary, 1/8 in. / 1/16 in. ID / 1.5
m
Connection between the absorber tube and
the Combustion Module.