Metrohm 920 Absorber Module - Manual (Page 55)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
920 Absorber Module
￭￭￭￭￭￭￭￭ 47
Inserting the Dosino in the instrument
1.
2.
1 Place the Dosino holder onto the mounting bolts and fix it in place
using the knurled screw.
Next step
Connect
capillary/tub-
ing at port
… … to
1 T connection (see Chapter 4.4.4, page 47)
2 Bottle with the absorber solution (see Chapter 4.4.6, page 52)
3 Connect the Metrosep A Trap 1 – 100/4.0 inlet (see Chapter 4.4.5,
page 49)
4.4.4 Connecting the T connection
The T connection is connected between the Dosino for ultrapure water,
the Dosino for the absorber solution and the transfer tubing.
Accessories
At inlet … Install this accessory
1 FEP tubing M6 for 920, 9 cm (6.1805.040) from Dosino for absorber
solution (7-
12 )