Metrohm 761 SD Compact IC - Manual (Page 12)

1 Introduction
761 SD Compact IC / Instructions for Use 8. 761.1043
4
1.2.2 Rear view
Figure 2: Rear panel 761 SD Compact IC
8 Opening for outlet capillaries
for discharge of eluent, regeneration
solution and sample solution
9 Opening for inlet capillaries
for supply of eluent, regeneration solu-
tion and sample solution
10 Opening for detector cable
11 Knurled screw
for fastening the rear panel
12 Detachable rear panel
Access to the inner compartment
13 Transport security screws
to secure the pump head when the in-
strument is transported
14 Mains switch
to switch instrument on and off:
I = ON 0 = OFF
15 Mains connection plug
Mains connection, see section 2.11
16 Fuse holder
Changing the fuses, see section 2.11.2
17 Serial number
18 Analogue output
output for analogue signal
19 Remote interface
Remote-I/O lines for connection of ex-
ternal devices
20 Connection for detector block
21 RS232 interface
PC connection
WARNING - Fire Hazard -
with the same type and rating of fuse
For continued protection replace only
Type 1.761.
Fuse
100-120V:
220-240V:
1,0A(T)
0,5A(T)
Made by Metrohm Herisau Switzerland
RS 232 Detector Block
Remote
Waste B Waste A
Transport security screws
Analog Output
8
9 10
11
11
13
14
15
16
21 20
19
18
17
12