7 hardware settings, Hardware settings – Metrohm 761 SD Compact IC User Manual
Page 58
3 «IC Net»
761 SD Compact IC / Instructions for Use 8.
761.1043
50
Polarity
Selection of the polarity for the output signal:
+
Positive polarity (for anions)
–
Negative polarity (for cations)
Measure channel
Display of the data source selected in the
Data
source
window (see Software Instructions for
Use «IC Net 2.3», Section 6.26.2).
Links
The
Links
tab in the window for the system settings serves to select and
set the COM port (for details see Software Instructions for Use «IC Net
2.3», Section 5.2.4 Links).
3.1.7 Hardware
settings
Selecting menu item
Hardware
when clicking with the right mouse button
on the 761 instrument icon opens the window for the hardware settings
consisting of the three pages
Hardware
,
Outputs
and
Alarm stops
.
Hardware
The
Hardware
tab in the window for the hardware settings contains gen-
erally valid settings which are set automatically when the instrument is
switched on.