Metrohm 838 Advanced Sample Processor Installation Instructions - Manual (Page 16)

10 838 Advanced Sample Processor, Safety notes
• Mains connection
This instrument must only be operated at the specified mains voltages
(see rear panel of instrument).
2.3 Personal protection
The different drives of the Advanced Sample Processor and the Swing
Head possess considerable force in order that they can freely move
even under heavy loads. They are fitted with electronic overload limiters
that are triggered if the mechanical resistance is too high.
When the instrument is running do not intrude in the working range
of the Sample Processor.
For the user there is a considerable
risk of injury from manual inter-
ference with the automatic processes of the instrument.
Important!
Before you use the instrument for the first time you must install the in-
cluded 6.2751.0xx Safety Guard, see p. 37.
The Sample Processor must not be operated without the Safety Guard
in position!
Figure 9 Safety Guard
(example shown. 6.2751.0xx for transfer robotic arm)
Biohazard
The Advanced Sample Processor does not provide sufficient protection
when processing potentially infectious samples or reagents.
In this case install the necessary safety devices.