Metrohm 838 Advanced Sample Processor Installation Instructions - Manual (Page 62)

3.6 Connection to Metrohm VA systems
56 Metrohm 838 Advanced Sample Processor, Installation
3.6 Connection to Metrohm VA systems
If the 838 Advanced Sample Processor is operated with a Metrohm VA
system, the predefined sequence methods of the 838 Advanced Sam-
ple Processor are used. It is absolutely essential to connect the
6.2142.050 keypad in order to adapt these methods.
The possible instrument combinations depend greatly on the individual
determination methods in voltammetry. Two systems are shown by way
of example below.
3.6.1 Connection to a Metrohm 797 VA Computrace
The 838 Advanced Sample Processor is connected to a Metrohm 797
VA Computrace with the 6.2141.180 multiple remote cable, see below.
Connection of pumps to the 731 Relay Box requires one 6.2160.010
adapter cable.
797
838
772
731
772
800 Dosino
6.2141.180
6.2160.010
Figure 41 Interconnection with 797 VA Computrace