13 inserting capillaries or tubings, 14 fitting the stand bracket, Inserting capillaries or tubings – Metrohm 838 Advanced Sample Processor Installation Instructions User Manual
Page 40: Fitting the stand bracket
3.3 Fitting the accessories
34
Metrohm 838 Advanced Sample Processor, Installation
3.3.13 Inserting capillaries or tubings
The individual chain links of the guide
chain can be opened using a screwdri-
ver or a similar implement in order to
insert capillaries or tubings.
Please note the marking on the chain
links.
Figure 25 Inserting capilliaries or tubings
3.3.14 Fitting the stand bracket
An external dilution or measuring cell can be fitted with the aid of a
6.2001.070 stand bracket on the Advanced Sample Processor. The
stand bracket must be engaged on the stirrer rail and fixed in position
with the two Allen screws.
Figure 26 Stand bracket
• The height and lateral alignment of the
cross-brace can be adjusted. It is
fixed in position with the supplied
screw on the rear panel of the tower.
Cross-brace
Allen screws