Metrohm 838 Advanced Sample Processor Installation Instructions - Manual (Page 59)

3.5 Connection to Metrohm IC systems
Metrohm 838 Advanced Sample Processor, Installation 53
Injektion valve in FILL position Injektion valve in INJECT position
Waste Sample Waste Sample
Column Eluent Column Eluent
838-specific settings in the «IC Net 2.3» program
Program for the 838 Advanced Sample Processor:
001 Move Sample
002 Lift work
003 Valve Fill
004 Pump 240 s
005 Valve Inject
006 Start DA
− Move needle to sample position
− Move lift with needle to working height
− Switch over injection valve on 838 to "Fill"
− Fill sample loop with sample
− Switch over injection valve on 838 to "Inject"
− Start data recording
3.5.11 Connection to 761 Compact IC or 790 Personal IC
The compact 761 Compact IC is also controlled from the PC. The 838
Advanced Sample Processor is controlled via an RS232 connection. If
necessary, Compact IC and Sample Processor may also be synchro-
nised via a remote connection.
838
761
PC PC
Figure 39 Interconnection with the 761 Compact IC via PC (RS232 only)
6.2134.100 6.2134.100