Metrohm 838 Advanced Sample Processor Installation Instructions - Manual (Page 17)

3.1 Installation flowchart
838 Advanced Sample Processor, Installation 11
3 Installation
This Chapter describes installation of all components of a Metrohm
Sample Processor and illustrates how to connect it to other instruments.
Please read the following sections carefully and follow the instructions in
detail. This is the only way of ensuring that a Sample Processor will func-
tion correctly.
3.1 Installation flowchart
The following installation flowchart provides an overview of the required
installation work. Please refer to the specified Chapters for further in-
formation.
Installation Chapter 3.2
Ø
Connecting the keypad Chapter 3.3.1
Ø
Connecting the mains cable Chapter 3.2.2
Ø
Connecting the Swing Head Chapter 3.3.2
Ø
* Fitting the retention plate Chapter 3.3.3
Ø
Fitting the needle or tubing Chapter 3.3.4
Ø
* Fitting the filtration cell holder or Dosino holder
Chapter 3.3.5
Ø
* Fitting the ultrafiltration cell Chapter 3.3.6
Ø
* Fitting the dialysis cell Chapter 3.3.7
Ш