Metrohm 838 Advanced Sample Processor Installation Instructions - Manual (Page 58)

3.5 Connection to Metrohm IC systems
52 Metrohm 838 Advanced Sample Processor, Installation
3.5.10 MIC-8 modular system with 817 Bioscan for the sugar analysis
This system requires the model 2.838.0020 of the 838 Advanced
Sample Processor.
The 838 Advanced Sample Processor is connected to a modular Bio-
scan system with 819 IC detector and 817 Bioscan in accordance with
Figure 38 via PC (RS232 connections).
817
PC
6.2125.160
838
818
PC
6.2125.110
PC
6.2125.110
Figure 38 MIC-8 interconnection with modular system with 817
Bioscan for sugar analysis
Capillary connections of the injection valve of the 838 Advanced Sam-
ple Processors:
5 4
1 2
6 3
Notice:
* cut a short fragment of
the 6.1831.060 PEEK
capillary (ø=0.5 mm).
** cut a fragment (approx
1 m) of the 6.1831.010
PEEK Capillary
(ø=0.25 mm).
PEEK Capillary
(6.1831.060)
Capillary to needle
(6.1831.050)
Pump tubing
(6.1826.130)
PEEK capillary *
PEEK Capillary **
Sample loop
(20 μL)