Metrohm 838 Advanced Sample Processor Installation Instructions - Manual (Page 19)

3.2 Instrument setup
838 Advanced Sample Processor, Installation 13
3.2 Instrument setup
3.2.1 Setup
Packaging
An 838 Metrohm Advanced Sample Processor and its specially packed
accessories are supplied in very protective special packaging consist-
ing of shock-absorbing plastic foam. Please store this packaging in a
safe place; it is the only way in which the safe transport of the instru-
ment can be guaranteed.
Checks
Please check that the delivery is complete and undamaged immedi-
ately on receipt (compare with delivery note and list of accessories
given in Section 6.3 ). If transport damage is evident please refer to the
information given in Section 6.4 "Warranty".
Location
The 838 Advanced Sample Processor is a robust instrument and can
therefore be used even in rough surroundings in laboratories and facto-
ries.
However, please ensure that it is not exposed to a corrosive atmos-
phere. The instrument should be serviced at regular intervals, particu-
larly when operated under rough conditions.
3.2.2 Mains connection
This instrument must only be operated at the specified mains voltages
(see rear panel of instrument).
Protect the connection sockets against moisture.
S: 115 VA U: 100 - 240 V f: 50 - 60 Hz
Figure 10 Mains connection socket
Mains connection 21