Arc Machines 307 - Manual (Page 129)

Arc Machines, Inc. Model 307 Orbital Tube Welder Training
Document No. 740096 Chapter 11. Page 4.
Rev. A
Model 307 Functions that may be set for security, viewing or data
recording during welding:
Is Logon required? Programmer enters passwords for
welding personnel. Touch System Set-up from the 307
Opening Screem and select Security Administration.
Have you selected the In-Sequence display? From the
307 Opening Screen select System Setup Functions and
from the Setup Screen select In-Sequence Display.
Has the Weld Counter been reset? From the Weld
Schedule-Main screen of your weld schedule select
Counter Reset and reset the counter.
Do you require Data Acquisition? From the Weld
Schedule-Weld screen of your program select Data
Acquisition. The Weld Identification Information screen
will appear on which the Weld ID number and other items
may be entered. (See Chapter 18).
Associated Data fields. From the Weld Schedule-Main
screen of your weld schedule, touch Associated Data. In
formation about the gas, equipment, tube, electrode and
data stream may be entered and items selected to appear
on the weld record.
Printer set-up. If a print-out is required set the 307 to
print a label or weld record. From the Opening Screen
select System Setup Functions and choose Printer Set-up.
(See Chapter 6, pages 8-9.)