Arc Machines 307 - Manual (Page 45)

Arc Machines, Inc. Model 307 Orbital Tube Welder Training
Document No. 740096 Chapter 4. Page 11.
Rev. A
Model 307 Remote Pendant -
The Model 307 Remote Pendant is used to in-
itiate the weld sequence at a distance of up to
25 feet from the power supply. Extension ca-
bles up to 100 feet are available. The pendant
keys have the same function as the similar
buttons on the 307 Power Supply. The remote
pendant plugs into the remote connector on
the side of the Model 307.
STOP - Shuts
down Model 307
Welding Opera-
tions
Weld/Test chang-
es 307 from weld
mode to test mode
and vice-versa
Start - Initiates
the Weld or Test
sequence
Downslope -
Initiates
programmed
Downslope from
weld sequence
Travel Counter
Clockwise Jog -
jogs rotor counter-
clockwise
Stop Weld turns
off the arc and
stops rotation.
Manual Purge
starts the flow of
gas to the weld
head.
Clear Fault resets
function
Travel Clockwise
Jog - Turns rotor
clockwise
Pendant