Arc Machines 307 - Manual (Page 60)

Arc Machines, Inc. Model 307 Orbital Tube Welder Training
Document No. 740096 Chapter 6. Page 4
Rev. A
In TEST MODE pressing Start initiates a Weld Sequence without an arc.
Pressing TEST will put the Model 307 into WELD MODE. In WELD MODE
pressing Start on the Weld Screen will initiate the weld sequence with an arc.
Pressing Weld will return the M307 to Test Mode.
Refer to Chapter 11. Welding with the 307 for more complete welding
instructions.
Press START to
begin welding.