Arc Machines 307 - Manual (Page 48)

Arc Machines, Inc. Model 307 Orbital Tube Welder Training
Document No. 740096 Chapter 4. Page 14.
Rev. A
Installing Printer Paper in the Model 307 Internal Printer.
Remove paper cover from the front of the Model 307 by pressing the
release button. Be careful not to drop the cover. Paper may be installed
manually or with Automatic Paper Load.
To load paper by hand, lift the head up/down lever until it
clicks. With the thermal head in the up position, insert the
paper straight into the printer. When the edge of the paper emerges from
between the thermal head and the platen, pull the paper out making sure
that it is correctly aligned. Return the thermal head to the down position.
Unload the paper with the thermal head in the up position. Pull the
paper straight up by hand in the direction in which the paper is normally
fed. If the paper is bonded on the core of the paper roll, separate the pa-
per from the roll and then pull the paper out.
Automatic paper loading. Load the paper with the thermal
head in the down position. Cut the end of the paper
Head up/down lever