Arc Machines 307 User Manual
Page 4
Arc Machines, Inc. Model 307 Orbital Welder Training
Document No. 740096 i.
Rev. A
REV
DCO#
CHANGE DESCRIPTION
DATE
APR
Model 307 Operator Training Guidelines
Notice
This document and the information contained herein is the property of Arc
Machines, Inc. It is proprietary and submitted and received in confidence. It
shall be used only for the purpose for which it is submitted and shall not be
copied in whole or in part without the prior express written permission of Arc
Machines, Inc.
The information in this document has been carefully reviewed and is believed
to be accurate. However, no responsibility is assumed for inaccuracies.
Information and instructions in this document are subject to change and Arc
Machines, Inc. reserves the right to change specifications and data without
notice.
WARNING!
The nature of the GTAW process creates some POTENTIAL HAZARDS. In
accordance with international safety regulations the EXCLAMATION SYMBOL
indicates that this equipment is considered HAZARDOUS until an operator has
been made aware of these POTENTIAL HAZARDS by READING THIS MAN-
UAL. The LIGHTNING FLASH SYMBOL indicates that there are potential elec-
trical hazards. The use and display of these symbols make it the OPERATOR’S
RESPONSIBILITY TO INSURE THAT HE HAS READ AND/OR BEEN MADE
AWARE OF ALL SAFETY-RELATED ITEMS CONTAINED IN THIS MANUAL.
Publication date: First Edition - September 2004
Copyright 2005 by Arc Machines, Inc.
All rights reserved.
A 5917 Correct output tolerance on pg 36 3/24/11 D.C.