Dynojet 250i: Installation Guide - Manual (Page 23)

Model 200i and 250i Motorcycle Dynamometer Installation Guide
2-1
C
H A P T E R
2
I
NSTALLATION
This chapter will walk you through unpacking and installing the dynamometer. To
ensure safety and accuracy in the procedures, perform the procedures as they are
described.
This chapter is divided into the following categories:
• Dyno Installation, page 2-2
• Battery, page 2-10
• Pickup Card, page 2-11
• Eddy Current Brake, page 2-12
• Support Arm and Monitor Tray, page 2-21
• Dyno Electronics, “Dyno Electronics” on page 2-23
• Routing Cables, page 2-25
• Tire Carriage Installation, page 2-34
• Drum Side and Top Covers, page 2-38
• Ramp Bracket, page 2-40
• Ground Hooks, page 2-43
• Zip Tube, page 2-44