Dynojet 250i: Installation Guide - Manual (Page 83)

A C C E S S O R I E S
Air Brake
Version 5 Model 200i and 250i Motorcycle Dynamometer Installation Guide
3-17
5 Remove the two bolts and two washers securing the brake caliper stop to the
brake bracket and remove the brake caliper stop.
Note: For clarity, the drum and parts of the dyno frame are not shown.
Figure 3-18: Remove the Brake Caliper Stop
6 Remove the hairpin cotter from the bottom clevis pin located on the front of the
air brake assembly.
Figure 3-19: Remove the Bottom Hairpin Cotter
brake caliper stop
brake bracket
bottom clevis pin hairpin cotter