Dynojet 250i: Installation Guide User Manual
Page 57
Advertising
I N S T A L L A T I O N
Tire Carriage Installation
Version 5
Model 200i and 250i Motorcycle Dynamometer Installation Guide
2-35
4
Remove the four 1/4 x 20-inch button-head screws securing the bearing bracket.
5
Remove the bearing bracket and the carriage screw.
Figure 2-36: Remove the Bearing Bracket and Carriage Screw
screw
bearing
bracket
carriage
screw
Advertising
This manual is related to the following products: