Dynojet 250i: Installation Guide - Manual (Page 77)

A C C E S S O R I E S
Air Brake
Version 5 Model 200i and 250i Motorcycle Dynamometer Installation Guide
3-11
2 Remove the Button board.
2a
Remove the four screws securing the Button board to the control panel and
set aside.
2b Remove the Button board and set aside.
Figure 3-10: Remove the Button Board
3 Unscrew the black switch body nut and remove the switch body. Set the nut and
switch body aside.
Figure 3-11: Remove the Switch Body
button board
screw
switch body
switch body nut